RME Netconfig job - 2500's / 2600's

Unanswered Question
Sep 4th, 2007

Hi all,

trying to update an ACL and make a daylight savings change to some routers. The 2500 and 2600's are failing with the following:

*********************

Protocol ==>

Message: ERROR:RME_CDL1031:

Transport session to device failed

TFTP: Failed on the device.

Failed to detect SSH version running on the device.

*******************

Telnet and SNMP RO are good to the device from RME.

Are these device types supported in RME in terms of Netconfig?

thanks,

Marty.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Tue, 09/04/2007 - 22:35

The devices are supported. You should pick one failing device, start a sniffer trace filtering on all traffic to that device, then re-execute your job. The trace should present a clearer picture as to why the transport protocols are failing.

Actions

This Discussion