why does not the radius server receive the attribute [8] packet ?

Unanswered Question
Sep 5th, 2007
User Badges:


The Radius Server can't get the attribute [8] packet all the same after I used the command of "radius-server attribute 8 include-in-access-req" in global mode of router.many thanks.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
rochopra Wed, 09/05/2007 - 00:28
User Badges:
  • Cisco Employee,

what is the IOS version you are running ?

If you need this attribute in accounting request try :

aaa accounting delay-start all


guominquan Wed, 09/05/2007 - 00:39
User Badges:


The IOS ver:c7200p-ipbase-mz.124-4.XD7.bin


aaa authentication ppp default local

aaa authentication ppp vpdn group radius

aaa authorization network vpdn group radius

aaa accounting network default start-stop group radius


radius-server attribute 8 include-in-access-req

radius-server host auth-port 1812 acct-port 1813

radius-server key gbok00lns

These are several commands configured for Router as above,please refer to them,thanks!

in addition,could you explain this command of aaa accounting delay-start all.



Premdeep Banga Sat, 09/08/2007 - 09:05
User Badges:
  • Gold, 750 points or more


This might help diagnosing the issue,

debug ppp authen

debug aaa authen

debug aaa author

debug radius

term mon

-aaa accounting delay-start...

Above command means that until the end client has received an IP address, do not send the accounting packet to the accounting server. Once it has, include the IP address handed out, and send the accounting information to the Accounting server.




This Discussion