09-05-2007 11:33 AM - edited 03-03-2019 05:27 AM
All, I am trying to implement STP load balancing from shop floor to core network.
vlan 13 (voice) over 54 wlan bridging link
all other vlans (data) over terascope links
Could you guys confirm attached topology (viso)
09-05-2007 11:37 AM
Any chance of a jpeg version ?
09-05-2007 11:44 AM
09-05-2007 11:57 AM
Hi
Apologies but can't read the detail in jpeg so will have a look at it when i get into work tomorrow.
Couple of things. Are you treating both uplinks as trunks ? and how are you going to ensure vlan 13 goes across 54MBps link. One thing you could try is to not allow vlan 13 on 155 trunk link and then gave the 54Mb link endpoints just be part of vlan 13.
I don't want to suggest too much though at moment as i really need to see diagram properly.
Jon
09-05-2007 12:10 PM
yes the uplinks are trunks and to ensure traffic for 54mb(voice) and 150 mb (data).
using stp vlan costs;
eg: vlan13 voice.
data links: spanning-tree vlan 13 cost 200
voice links: spanning-tree vlan 1, 10-12, 131,238 cost 200
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide