Bridge configuration using 1200 serias AP's

jorge.s · ‎09-05-2007

Hi,

I need to implement a bridge connection, which will be used has an exception of our Office network. Basically we have the central office, and we intend to, using two Cisco Aironet 1242ag-e-k9, extend our network into a remote location. In our main office we have different vlan's, and I would like to carry them to the remote office. Basically I want to do a bridge connection. Could you help me with the config?

Is it possible to, using one SSID to carry different VLAN's? or another way, is it possiblel to associate has bridge, to several SSIDs between two AP1242s ?

Rob Huffman · ‎09-06-2007

Hi Jorge,

Hope all is well with you :) I have never done much with bridging so I don't know if this helps :( But I did come across this good doc that discusses the config of Multiple vlans in a bridging environment;

VLANs on Bridges

From this doc;

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801d0815.shtml#vlanbr

Hope this helps!

Rob