cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1543
Views
0
Helpful
19
Replies

Call recording

vjemin
Level 1
Level 1

I need to configure call recording with IPCC Express Premium 4.0.

Any docs?

Please help

19 Replies 19

thomasarun
Level 1
Level 1

Recording particular calls from CSD or you want to record all the calls?

I need to record all the calls from the all agents.

1) Open Desktop Administrator

2) Click to the following: Locations -> LCC -> Desktop

Configuration -> Work Flow Groups -> Agents -> Default -> Work Flow

3) In Events, you can select "Answered", go to the Rules window and click New

4) Enter the name of the rule and then in the Data Fiedl Conditions, select Edit

5) In the Data Field, you can select "Called#" and in the filter check "Is not Empty".

Check Enable condition and Press ok

6) Check Enable Rule under the Current Rule Condition section

7) Now, go to the Actions window and add an action.

8) Slect the tab "Utility Action", Click new and in the ACtion name you can put Recording.

9) In Action Type, select Record

10) In the Action select Start

Now we are goin to create the workflow when the agent hangs up:

11) In Events, you can select "Dropped", go to the Rules window and click New

12) Enter the name of the rule and then in the Data Fiedl Conditions, select Edit

13) In the Data Field, you can select "Called#" and in the filter check "Is not Empty".

Check Enable condition and Press ok

14) Check Enable Rule under the Current Rule Condition section

15) Now, go to the Actions window and add an action.

16) Slect the tab "Utility Action", Click new and in the ACtion name you can put

StopRecording.

17) In Action Type, select Record

18) In the Action select Stop

- Restart VOIP monitor service

HTH

Arun

Hi Arun,

thanks for info. I have done like you write, but still I can't listen recorded files.

In Desktop Administrator in Locations -> LCC -> VoIP Monitor, I can't see any IP phone (MAC address).

On server I get a two .raw files and both have 1KB. I can see that file on supervizor desktop, but there is nothing recorded.

What shoud I configure on IPCC server for monitoring port?

Thanks,

Vlaho

Go to Control center-->component activation check whether the recording and monitoring is activated or not and there is an option in CSD for saving the files as .wav

Arun

Hi,

all services about monitoring and recording are activated.

Is there some other way how to save a two .raw files to one .wav

Did you enable 'Span to PC Port' option in phone from CCM?

I don't have that option. I have 7940. Not 7941.

I have configured SPAN on switch.

Check the phones page in CCM u can find the option. same 7940 phone i am using.

I checked it and I don't have that option.

In Product Specific Configuration I have only these options:

Disable Speakerphone

Disable Speakerphone and Headset

Forwarding Delay*

PC Port*

Settings Access*

Gratuitous ARP*

PC Voice VLAN Access*

Video Capabilities*

Auto Line Select*

Web Access*

Some agents PC's are connected directly on switch.

Enable the 'PC Voice VLAN Access'option

Some agents PC's are connected directly on switch --wat u mean by this?

This option is enabled.

It mean that not all agents PC's are connected to IP phone. There is some PC's with agent application who are connected to switch directly.

And there is some more strange things. When I restart some Cisco Desktop services, calls start to record, but only few of them, and after some time it stops recording.

Strange ...

You can check the System-->system parameters -->recording count

If the recording count is 0 i dont think u can record calls

Hi,

recording count is 10. So, this is OK.

On second NIC I have some IP address, and on LAN switch I have SPAN configured. Monitoring port is that second NIC on IPCC server.

In Cisco Agent Desktop Configuration Setup ---> VoIP Network Device ---> adapter name is second NIC.

From supervizor desktop I can barge-in, intercept a call, silently listen an agent's phone conversation, but I can't record an agent's call.

Where the problem is!!!?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: