09-06-2007 01:33 AM - edited 03-14-2019 11:24 PM
I've got a UC520 running CME and CUE. CME is running great, so im now configuring CUE. I've installed CUE and thats running.
Ive configured a voicemail number of 200 under VOICEMAIL > CALL HANDLING (on CUE html page)
There's a dial-peer as follows:
dial-peer voice 2000 voip
description ** cue voicemail pilot no **
destination-pattern 200
session protocol sipv2
session target ipv4:10.1.10.1
dtmf-relay sip-notify
codec g711alaw
no vad
and an ephone-dn:
ephone-dn 27 dual-line
mailbox-selection last-redirect-num
number 200
label 200
description 200
name voicemail
When I dial 200, or set a call-forward on no-an to the number 200, I get the unrecognised number beeps instead of voicemail answering the call.
Help please!
Solved! Go to Solution.
09-06-2007 06:21 AM
Change the codec on the SIP dial peer from G711alaw to G711ulaw.
This should make the calls work
09-06-2007 05:40 AM
Hi,
you don't need the ephone-dn, what is happening is that the system doesn't know where to send the call as you have two different destinations. remove the ephone-dn and all should work
HTH
Dave
09-06-2007 06:17 AM
Right ive removed the ephone dn. When I call 200 it rings once, then I get the unrecognised number beeps.. odd..
09-06-2007 06:21 AM
Change the codec on the SIP dial peer from G711alaw to G711ulaw.
This should make the calls work
09-06-2007 06:39 AM
It seems g711ulaw and g711alaw are the bane of my life at the moment!!
cheers, works perfectly!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: