09-06-2007 06:27 AM - edited 03-11-2019 04:07 AM
Hi
My question is can the pix send traffic out through the same interface it received the traffic on? I'm currently using pix os version 6.2.
Thanks
Dan
Solved! Go to Solution.
09-06-2007 07:28 AM
No Dan not with that version of PIX OS, you need to upgrade to the 7.x or 8.x and also note that you may need more memory to accomplish when you upgrade you want to enable the command:
CYPHER(config)# Same-security-traffic permit ?
configure mode commands/options:
inter-interface Permit communication between different interfaces with the
same security level
intra-interface Permit communication between peers connected to the same
interface
09-06-2007 06:43 AM
With this version you cannot.
http://cisco.com/en/US/docs/security/asa/asa72/command/reference/s1_72.html#wp1289167
09-06-2007 07:28 AM
No Dan not with that version of PIX OS, you need to upgrade to the 7.x or 8.x and also note that you may need more memory to accomplish when you upgrade you want to enable the command:
CYPHER(config)# Same-security-traffic permit ?
configure mode commands/options:
inter-interface Permit communication between different interfaces with the
same security level
intra-interface Permit communication between peers connected to the same
interface
09-06-2007 09:47 AM
I would like to add something here....Not every 7.x code has this functionality. U-turning of traffic is allowed only from 7.2.1 onwards.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: