I am having a WAN connection between 2 sites A&B. ON A side we are using a private/leased line of 768k and on B side we are using 12 channels of a PRI line.
When I am applying QOS on the A side eveything is fine and in the the output of command "sh int s0/0" it is showing available bandwidth is equal to 75% of 768K.
But on B side when i have applied Qos it is showing me the available bandwidth is 3kb.
After removing QOS on the channel-group int it is showing me 768k of avaible bandwidth in "sh int s1/0:1".
I have attached all the outputs in the attachment.
Waiting for the replies.
The attached policy is
bandwidth percent 4
bandwidth percent 35
bandwidth percent 1
bandwidth percent 30
The formula to consider is:
Available Bandwidth = max-reserv x interface bandwidth - allocated bandwidth
In your case:
interface bandwidth = 768 kb
max-reserv = 100%
allocated bandwidth = 230 kbps + 30 kbps (4%) + 268 kbps (35%) + 7 kb (1%) + 230 kbps (30%) = 765 kbps
Thus remaining bandwidth is 3 kbps. Nothing wrong with it. Router can do the math.