creating internet access from ASA

Unanswered Question
Sep 6th, 2007
User Badges:

Hi all, if I want to use PAT for my inside clients to access the internet how do I do this on my asa, do I create a static nat rule, then add the LAN as my source network, then in translated, use the outside interface, do I need to use the PAT option at the bottom, or do I leave that ?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jens Becker Mon, 09/17/2007 - 22:01
User Badges:

Here is an example for configuring PAT:

(config)# global (outside) 1 interface

(=> binds your external IP (from Interface "outside"))

(config)# nat (inside) 1

(=> configures NAT on the "inside" interface)


This Discussion