cisco aironet 1310G non_native vlan and dhcp

Unanswered Question
Sep 6th, 2007

hi evrybody

i have problem with my cisco aironet 1310G

non-native vlan can not get(dynamicly)ip address from cisco aironet 1310G

this is all my configuration please can someone help me

ip dhcp excluded-address 20.20.20.20

ip dhcp excluded-address 20.0.0.0

ip dhcp excluded-address 30.0.0.0

ip dhcp excluded-address 30.30.30.30

ip dhcp excluded-address 10.0.0.0

ip dhcp excluded-address 10.0.0.10

ip dhcp excluded-address 10.1.0.0

ip dhcp excluded-address 10.1.0.10

!

ip dhcp pool d01

network 10.0.0.0 255.255.255.0

default-router 10.0.0.10

!

ip dhcp pool d02

network 20.0.0.0 255.255.255.0

default-router 20.20.20.20

!

ip dhcp pool d03

network 30.0.0.0 255.255.255.0

default-router 30.30.30.30

!

!

no aaa new-model

!

dot11 ssid vlan01

vlan 1

authentication open

dot11 ssid vlan02

vlan 2

authentication open

!

dot11 ssid vlan3

vlan 3

authentication open

!

username cisco password 7 070C285F4D06

!

bridge irb

!

!

interface Dot11Radio0

no ip address

no ip route-cache

!

broadcast-key vlan 2 change 100

!

broadcast-key vlan 3 change 100

!

ssid vlan01

!

ssid vlan02

!

ssid vlan3

!

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

station-role root access-point

!

interface Dot11Radio0.1

encapsulation dot1Q 1 native

no ip route-cache

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

!

interface Dot11Radio0.2

encapsulation dot1Q 2

no ip route-cache

bridge-group 2

bridge-group 2 block-unknown-source

no bridge-group 2 source-learning

no bridge-group 2 unicast-flooding

!

interface Dot11Radio0.3

encapsulation dot1Q 3

no ip route-cache

bridge-group 3

bridge-group 3 subscriber-loop-control

bridge-group 3 block-unknown-source

no bridge-group 3 source-learning

no bridge-group 3 unicast-flooding

bridge-group 3 spanning-disabled

!

interface FastEthernet0

no ip address

no ip route-cache

hold-queue 80 in

!

interface FastEthernet0.1

encapsulation dot1Q 1 native

no ip route-cache

bridge-group 1

no bridge-group 1 source-learning

bridge-group 1 spanning-disabled

!

interface FastEthernet0.2

encapsulation dot1Q 2

no ip route-cache

bridge-group 2

no bridge-group 2 source-learning

bridge-group 2 spanning-disabled

!

interface FastEthernet0.3

encapsulation dot1Q 3

no ip route-cache

bridge-group 3

no bridge-group 3 source-learning

bridge-group 3 spanning-disabled

!

interface BVI1

ip address 10.0.0.10 255.255.255.0

no ip route-cache

!

interface BVI2

ip address 20.20.20.20 255.255.255.0

no ip route-cache

!

interface BVI3

ip address 30.30.30.30 255.255.255.0

no ip route-cache

!

control-plane

!

bridge 1 priority 9000

bridge 1 protocol ieee

bridge 1 route ip

bridge 2 priority 10000

bridge 2 protocol ieee

bridge 3 priority 3100

bridge 3 protocol ieee

!

!

!

line con 0

line vty 0 4

login local

!

end

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
irisrios Wed, 09/12/2007 - 11:11

Make sure the swithch port to which access point is configured as a trunk and is allowed to pass all Vlan traffic.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode