VOIP on a 3660 with a CT1 PRI card

Answered Question
Sep 6th, 2007
User Badges:

I have a 3660 that has a CTI PRI card in it...I can configure the controller part fine and the serial interface is created...but I don't get a voice-port. Is it possible to use this card as a connection to a telco provided PRI for outbound calls. I have done this in the past with MFT cards and would like to be able to use this extra equipment.

I have updated the ios and it doesn't appear to help...


Thanks,


Joe


Correct Answer by paolo bevilacqua about 9 years 8 months ago

No, you cannot use the NM-1CT1 for voice.

You will need something like NM-HVD to support voice on the 3660, or AIM-VOICE-30 and VWIC card in an NM module.


Hope this helps, please rate post if it does!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
paolo bevilacqua Thu, 09/06/2007 - 12:38
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

No, you cannot use the NM-1CT1 for voice.

You will need something like NM-HVD to support voice on the 3660, or AIM-VOICE-30 and VWIC card in an NM module.


Hope this helps, please rate post if it does!

Actions

This Discussion