Logging snmp linkdown/linkup 3750's

Unanswered Question
Sep 6th, 2007
User Badges:

I must be having a brain sludge day.


Senario


2 x 3570's (stackmembers) at location A

2 x 3570's (stackmembers) at location B


they are connected via 2 trunks in a etherchannel group.


The question is for command

snmp [authentication |

coldstart | linkdown |

linkup | warmstart]


I'd like to only be notified of the up/down status on the trunked interfaces only and not of any of the other interfaces configured as switchport access.


Thoughts..Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
glen.grant Fri, 09/07/2007 - 01:01
User Badges:
  • Purple, 4500 points or more

Make sure you have " no snmp trap link-status " on all user access ports . Not sure if that is the exact syntax but its close just use your tab key for the correct commands.

Actions

This Discussion