PRI Module in 2800

Unanswered Question

I had an early 3640 router with a PRI ISDN module in it. I've since decommisioned the 3640 and I want to put the PRI module in a 2800. However, the 2800 does not appear to recognise it. The 2800 is running c2800nm-advipservicesk9-mz.124-15.T1.bin The Cisco site appears to show that the 2800 supports a PRI ISDN module.


A "show inv" shows an unknown module in the router.


Do I need a newer version of the PRI card for my 2800 ? Is my existing one only good as a door-stop ?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Fri, 09/07/2007 - 08:45
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi,


on the ISR routers, for data PRI, you can use either NM-xCE1T1 (x is the number of ports), or the VWIC-xMFT, or VWIC2-xMFT-xE1T1


With the latter hardware, support for data PRI has been added just recently and some dial features are missing. See:


http://cisco.com/en/US/products/ps6706/products_feature_guide09186a00805fe293.html


hope this helps, please rate post if it does!

Actions

This Discussion