09-08-2007 10:36 PM - edited 03-03-2019 06:40 PM
Can anyone assist ?
In the text books it says that the EIGRP metric is calculated using
a sum of the segment delays and the lowest segment bandwidth between the router and the destination etc.
My question is how does an EIGRP router know about the links between
its neighbor and the network it is doing a calculation for ?
Doesn't the neighbor only tell it about a remote network with an AD ? Not all the segment details in the
path from the neighbor to the network being advertised .
09-09-2007 01:00 AM
EIGRP uses these scaled values to determine the total metric to the network:
metric = [K1 * bandwidth + (K2 * bandwidth) / (256 - load) + K3 * delay] * [K5 / (reliability + K4)]
Please refer to the document below for more info:
http://www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094cb7.shtml#eigrpmetrics
regards,
Leo
09-09-2007 04:07 AM
Thanks Leo .
I understand it now .
these attributes are pass between
EIGRP routers and the with the total
delay being incremented and the min bandwidth updated if required .
eg
Vector metric:
Minimum bandwidth is 56 Kbit
Total delay is 41000 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide