cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
394
Views
5
Helpful
4
Replies

HSRP Problem

Dear All,

I have configure 2 4503 switch into HSRP mode , they are working alright,I have one confusion that is what will the VTP mode should both the switch work,iI have configured one as server ,and other as client,when i test my hsrp,it works ,but i am not able to see all vlan in standby switch.kindly help.

Regards

Amit kulshrestha

1 Accepted Solution

Accepted Solutions

Hi

No u r standby will not work as a server,it will be in client mode.

If these swithes are u r core,then configure them to be as vtp servers one as a primary and other as secondry.

Thanks

Mahmood

View solution in original post

4 Replies 4

Edison Ortiz
Hall of Fame
Hall of Fame

I don't think your problem is related to HSRP so the title is a bit misleading.

Let's see the output from the following commands on both switches:

show int trunk

show vtp status

show vtp password

show vlan

Thanks

Friend Edison , your question has solved my problem,I have forgot to give vtp password on standby switch which i have configured as vtp client.now i am able to see all vlan in standby switch.thanxs.But I have 1 more query ,if my active fails ,will my standby switch will work as vtp server or client ,or how it will server my vlan .

thanxs for youe help.

amit

Hi

No u r standby will not work as a server,it will be in client mode.

If these swithes are u r core,then configure them to be as vtp servers one as a primary and other as secondry.

Thanks

Mahmood

Amit,

The VTP assignment is not dynamic. If you only have 2 switches, I recommend configuring both as VTP servers.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco