09-10-2007 12:15 AM - edited 03-05-2019 06:22 PM
Hi All,
In order to support 10GB link for 6500 non-E module, Fan Tray 2 need to be installed. Does the "Fan Tray 2" means the high speed fan tray? and also 2500W power supply or up needed to support the "Fan Tray 2?"
Thank you!
Best Regards,
Teru Lei
Solved! Go to Solution.
09-10-2007 12:20 AM
Hi
Yes you need the non-E high speed fan tray and the part number is:
WS-C6K-9SLOT-FAN2
Yes you will need to upgrade the power supply to at least 2500W.
HTH
Jon
09-10-2007 12:20 AM
Hi
Yes you need the non-E high speed fan tray and the part number is:
WS-C6K-9SLOT-FAN2
Yes you will need to upgrade the power supply to at least 2500W.
HTH
Jon
11-10-2007 03:08 PM
How can one tell if they have the high speed fan tray, fan2 installed?
Is there a command?
Thanks..
11-10-2007 05:19 PM
Hi
"sh env cooling" should show you the fan part number.
HTH
Jon
11-11-2007 10:39 AM
I don't have that option. I am running CatOS. I have a show env temp but it doesn't show any part numbers. Any other suggestions.
Thanks for your help.
Paul
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: