Converting 6509 to IOS

Answered Question
Sep 10th, 2007

I am preparing to convert a 6509 from CatOS to IOS. I was wondering if anyone knows if there is a way to convert back from IOS to CatOS?

Thanks,

Jack

I have this problem too.
0 votes
Correct Answer by mohammedmahmoud about 9 years 2 months ago

Hi Jack,

Here you are both:

System Software Conversion from CatOS to Cisco IOS for Catalyst 6500/6000 Switches

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml

System Software Conversion from Cisco IOS to CatOS for Catalyst 6500/6000 Switches

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801350b8.shtml

HTH,

Mohammed Mahmoud.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
mohammedmahmoud Mon, 09/10/2007 - 11:34

Hi Jack,

Here you are both:

System Software Conversion from CatOS to Cisco IOS for Catalyst 6500/6000 Switches

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml

System Software Conversion from Cisco IOS to CatOS for Catalyst 6500/6000 Switches

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801350b8.shtml

HTH,

Mohammed Mahmoud.

Actions

This Discussion