Routing Calls to an extension based on phone number

Unanswered Question
Sep 10th, 2007
User Badges:

How do I configure the call Manager to allow a certain phone number to reach a specified extension?


EX.

770-382-2144 to ext 6680036

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Chris Deren Mon, 09/10/2007 - 13:40
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

Do you mean when someone calls 770-382-2144 send it to 6680036?

If yes, then the simplest way is to use Translation Patterns when the extensions are different from the DID digits.


HTH,


Chris

ccieid10t Mon, 09/10/2007 - 13:44
User Badges:

Actually 770-382-2144 is the called number calling into the main number, 6680036 will answer.

Chris Deren Mon, 09/10/2007 - 14:43
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

called or calling?


If you want to do routing based on ANI (calling number) this can not be done with CallManager alone. You will need to send all calls through IPCC or Unity.


Chris

ccieid10t Mon, 09/10/2007 - 14:51
User Badges:

Oops, calling number. We have a Unity server, do we have to setup up call handlers?

Chris Deren Mon, 09/10/2007 - 14:54
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

No, you can create routing rule based on the ANI digits and send the call to a subscriber. Keep in mind that you will have to route all calls thorugh Unity and you will be limited by the number of Unity ports that you have.


Chris

ccieid10t Mon, 09/10/2007 - 15:06
User Badges:

So for this to work, we have a branch site with a main number with FXO to the CLEC, CCM and Unity is at HQ. Branch site has VPN connection to HQ.


When you said all calls, meaning all calls going to the branch site and routed it through Unity so Unity can forward calls based on ANI? I don't have to setup any thing in CCM?

ccieid10t Mon, 09/10/2007 - 14:55
User Badges:

Oops, calling number. We have a Unity server, do we have to setup up call handlers?

Actions

This Discussion