i have this configuration:
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
pppoe-client dial-pool-number 6
pppoe-client dial-pool-number 5
pppoe-client dial-pool-number 4
when i try:
<config-if>#no pppoe-client dialer-pool-number 4
it just wont be removed!
on my other fastethernet intefaces i am able to remove it with the same command
how do i find out what is wrong??
Cisco IOS Software, 3800 Software (C3845-IPBASE-M), Version 12.4(3d), RELEASE SO
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 19-Apr-06 08:56 by alnguyen
ROM: System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)
uptime is 1 hour, 37 minutes
System returned to ROM by reload at 06:25:55 GMT3 Tue Sep 11 2007
System restarted at 06:26:41 GMT3 Tue Sep 11 2007
System image file is "flash:c3845-ipbase-mz.124-3d.bin"
Cisco 3845 (revision 1.0) with 223232K/38912K bytes of memory.
Processor board ID FCZ102770EV
2 FastEthernet interfaces
2 Gigabit Ethernet interfaces
2 Token Ring interfaces
8 ATM interfaces
DRAM configuration is 64 bits wide with parity enabled.
479K bytes of NVRAM.
62720K bytes of ATA System CompactFlash (Read/Write)
Configuration register is 0x2102