ops manager and hp nnm integration issue

Answered Question
Sep 10th, 2007
User Badges:

hi all,

can i integrate hp nnm and ciscoworks ops manager just as i can integrate nnm and lms?if there is no available tool,is there any way to integrate them?thanks in advance.

Correct Answer by Joe Clarke about 9 years 8 months ago

No, there are no CUOM launch points installed. If you integrate LMS with NNM, you will get CiscoView and Device Center launch points within NNM.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Joe Clarke Mon, 09/10/2007 - 21:46
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

While you can integrate the symbols, traps, etc. into NNM, there are no integration launch points back into CUOM by default.

thetnaing00 Mon, 09/10/2007 - 22:22
User Badges:

hi joe,

thanks.so i cannot launch the ops manager by clicking the icons in HP NNM,am i right?


the other thing is can i use integration tool 1.6 to integrate lms 2.6 with nnm 7.5? thanks

Correct Answer
Joe Clarke Mon, 09/10/2007 - 22:30
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

No, there are no CUOM launch points installed. If you integrate LMS with NNM, you will get CiscoView and Device Center launch points within NNM.

Actions

This Discussion