How do you disable a NVIO interface?

Answered Question
Sep 11th, 2007

We recently upgraded to IOS c2801-ipbasek9-mz.124-8c.bin

It created an interface NVIO. Is there a way do this?

thanks

NVI0 is up, line protocol is up

Hardware is NVI

Interface is unnumbered. Using address of NVI0 (0.0.0.0)

MTU 1514 bytes, BW 10000000 Kbit, DLY 0 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation UNKNOWN, loopback not set

Last input never, output never, output hang never

Last clearing of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

0 packets input, 0 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

0 packets output, 0 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

0 output buffer failures, 0 output buffers swapped ou

I have this problem too.
0 votes
Correct Answer by Edison Ortiz about 9 years 4 months ago
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.

Actions

This Discussion