BRI slow to dial

Unanswered Question
Sep 11th, 2007
User Badges:

Hi All


CME 4 with Bri connection takes about 20 seconds to establish an outgoing call via BRI.


Where do I start to diagnose problem?


Port setup as follows:


interface BRI0/2/0

no ip address

isdn switch-type basic-net3

isdn point-to-point-setup

isdn incoming-voice voice

isdn static-tei 0

isdn skipsend-idverify


normal dial-peer with 9T setup for outgoing calls.




Thanks in advance


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Tue, 09/11/2007 - 05:04
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

How you interdigit timeout is set ?

paolo bevilacqua Tue, 09/11/2007 - 05:24
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Please add "isdn sending-complete" under interface. If no change, please send the usual debug isdn q931, preceded by a "show clock" at the time you press #.


Does it happens with all the numbers ?

Actions

This Discussion