09-11-2007 06:46 AM - edited 03-05-2019 06:24 PM
I'd like to set up multiple workstations (Certain ones) to connect to particular switch ports. Can someone point me to some Documentation on how to set up a Pool using MAC Based Security?
The switch is a Cisco 3548XL
Thanks!
Solved! Go to Solution.
09-11-2007 07:08 AM
That's for a 3550.
To the OP: The port security feature set on the 3548 is rather limited. Here's the (short) section in the config guide:
09-11-2007 06:54 AM
Hi, You can use port security.Please check,
Hope this helps.
09-11-2007 07:08 AM
That's for a 3550.
To the OP: The port security feature set on the 3548 is rather limited. Here's the (short) section in the config guide:
09-11-2007 08:28 AM
VERY HELPFUL THANK YOU VERY MUCH!!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: