Solved: MAC Based Security

jemorton · ‎09-11-2007

I'd like to set up multiple workstations (Certain ones) to connect to particular switch ports. Can someone point me to some Documentation on how to set up a Pool using MAC Based Security?

The switch is a Cisco 3548XL

Thanks!

jcoke · ‎09-11-2007

That's for a 3550.

To the OP: The port security feature set on the 3548 is rather limited. Here's the (short) section in the config guide:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/release12.0_5_wc6/scg/swports.html#wp1075712

View solution in original post

nambi_gct · ‎09-11-2007

Hi, You can use port security.Please check,

http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.2_25_se/configuration/guide/swtrafc.html#wp1038501

Hope this helps.

jcoke · ‎09-11-2007

That's for a 3550.

To the OP: The port security feature set on the 3548 is rather limited. Here's the (short) section in the config guide:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/release12.0_5_wc6/scg/swports.html#wp1075712

jemorton · ‎09-11-2007

VERY HELPFUL THANK YOU VERY MUCH!!!