Frame Relay QOS Config

Answered Question
Sep 11th, 2007

I am working with 2621xm IOS (12.2(15)T10)

and I am looking for a basic QOS configuration to use so that I can prioritize traffic from my inside network to an external host IP. Below is what I think should work...please provide any suggestions/feedback.

class-map match-all CLASS-DEBIT

match access-group name Debit-out

!

!

policy-map QOSPOLICY

class CLASS-DEBIT

bandwidth 10

random-detect

ip access-list extended Debit-out

permit ip 10.200.10.0 0.0.0.255 XX.XX.XX.0 XXX.XXX.XXX.XXX

Applied to frame interface

frame-relay class QOSPOLICY

I have this problem too.
0 votes
Correct Answer by Edison Ortiz about 9 years 2 months ago

show frame pvc [dlci]

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Edison Ortiz Tue, 09/11/2007 - 10:46

'frame-relay class' command will reference a map-class not a class-map :)

class-map match-all CLASS-DEBIT

match access-group name Debit-out

!

!

policy-map QOSPOLICY

class CLASS-DEBIT

bandwidth 10

random-detect

map-class frame-relay QOSPOLICY

service-policy output QOSPOLICY

interface sx/x

frame-relay class QOSPOLICY

paul.coley Tue, 09/11/2007 - 11:30

what are the show commands that can be used to see if this works?

I did a show int s0/0 and the queueing strategy is still FIFO

Actions

This Discussion