09-11-2007 12:27 PM - edited 03-05-2019 06:25 PM
Hello,
I need your help please.
I am configuring glbp in a link 6MB and other of 512 Kbps.
How Know I the values of Upper and low for weighting?
Thanks
09-11-2007 06:42 PM
You set the "weighting" values to mirror your bandwidth ratios. Since you have 6 Mbps to .5 Mbps, the values of 12 and 1, or 120 and 10, or 240 and 20 should all work. (Weight range is 1 to 254.)
e.g.
Router1#sh run int e0/0
interface Ethernet0/0
ip address 10.0.0.1 255.255.0.0
glbp 1 ip 10.0.0.10
glbp 1 weighting 120
glbp 1 load-balancing weighted
Router2#sh run int e0/0
interface Ethernet0/0
ip address 10.0.0.2 255.255.255.0
glbp 1 ip 10.0.0.10
glbp 1 weighting 10
glbp 1 load-balancing weighted
09-12-2007 03:09 AM
Thanks for your help.
Leandro.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: