09-11-2007 07:09 PM - edited 07-03-2021 02:36 PM
How man wirelesslancontrollers are permited configure into the same mobility group?
09-12-2007 02:05 AM
I believe it is limited to 24.
09-20-2007 10:44 AM
It is 24. If you are using WiSMs, these are technically 2 controllers. Magic number 24.
09-21-2007 05:29 AM
Hi Ricardo,
Just to add a clip to the good info from David and Larry (5 points to both of you!);
A mobility group can include up to 24 controllers of any type. The number of access points supported in a mobility group is bound by the number of controllers and controller types in the group.
Examples:
1. A 4404-100 controller supports up to 100 access points. Therefore, a mobility group consisting of 24 4404-100 controllers supports up to 2400 access points (24 * 100 = 2400 access points).
2. A 4402-25 controller supports up to 25 access points, and a 4402-50 controller supports up to 50 access points. Therefore, a mobility group consisting of 12 4402-25 controllers and 12 4402-50 controllers supports up to 900 access points (12 * 25 + 12 * 50 = 300 + 600 = 900 access points).
From this good doc;
http://www.cisco.com/en/US/docs/wireless/controller/4.0/configuration/guide/c40mobil.html
Hope this helps!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: