09-11-2007 09:11 PM
Hi,
My syslog file grows quite first, how can i manage it? on F:\Program Files\CSCOpx\log\syslog.log
Solved! Go to Solution.
09-13-2007 08:47 AM
You should start a command prompt, then run:
F:\progra~1\cscopx\bin\perl.exe F:\progra~1\cscopx\bin\logrot.pl -c
That will start the logrot configurator. Again, refer to the online help for more details.
09-11-2007 10:13 PM
Use logrot.pl. The script can be found under F:\progra~1\CSCOpx\bin. It is also documented in the online help. Just search for logrot.
09-13-2007 06:29 AM
Hi Clarke,
When i run the script F:\progra~1\CSCOpx\bin\perl.exe the window just opens and hungs at that. The F:\progra~1\CSCOpx\bin\logrot.pl can open. What could be the problem?
09-13-2007 08:47 AM
You should start a command prompt, then run:
F:\progra~1\cscopx\bin\perl.exe F:\progra~1\cscopx\bin\logrot.pl -c
That will start the logrot configurator. Again, refer to the online help for more details.
09-13-2007 08:56 AM
Thanks will get back.
09-13-2007 09:35 PM
Hi,
I have re-checked on the online help and i think my problem is on the command syntax, i have tried entering the command in different ways but can't get it right. See below.
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\Administrator>F:\Program Files\cscopx\bin\perl.exe F:\Program Files\cscopx\bin\logrot.pl -c
'F:\Program' is not recognized as an internal or external command,operable program or batch file.
C:\Documents and Settings\Administrator>
Kindly assist.
Rgds
Winnie.
09-13-2007 09:40 PM
If you copy and paste exactly what I put in my previous post, it will work:
F:\progra~1\cscopx\bin\perl.exe F:\progra~1\cscopx\bin\logrot.pl -c
09-13-2007 10:26 PM
Clarke,
Thank you very much, i will now monitor my log files now.
Regards
Winnie.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide