Easy VPN with mutiple outside interfaces

luis.ribeiro · ‎09-12-2007

Hi, I'm trying to do a VPN configuration with easy VPN (between two IOS router, ver 12.4(11)T2). The central router has one Internet connection. The remote router has 2 Internet connection (to provide more bandwidth - ADSL). When I try to the feature "multiple outside interface" I get an error:

R2R(config)#int eth 1/0

R2R(config-if)#crypto ipsec client ezvpn LFR-CLI outside

R2R(config-if)#int eth 1/1

R2R(config-if)#crypto ipsec client ezvpn LFR-CLI outside

Error:Only one outside interface is allowed per ezvpn configuration

Best Regrads

lapascua06 · ‎09-17-2007

Hi,

EZVPN would not allow you to apply that same ipsec client config on different interfaces,

Try to check this link focusing on the remote router and adjust the configuration base on your setup:

http://www.cisco.com/en/US/products/ps6635/products_white_paper0900aecd8039e301.shtml

Hope this helps...

Cheers,

lapascua

abuladzesergo · ‎09-14-2015

I have same problem.

I try to do one vpn connection throught 2 internet connections to one EasyVPN server.

If I try to do second vpn with same config - it writes that "Vlan1 cannot be part of two easy VPN Remote configs."

If I try to add same config to other wan interface - it writes: "Only one outside interface is allowed per ezvpn configuration."