Problem uploading IOS to Cisco 3560

Unanswered Question
Sep 12th, 2007
User Badges:

Hi, I have sent an IOS file called c3560-ipbasek9-mz.122-40.SE.bin (IP Base version) to by Cisco Catalyst 3560 switch by running:


copy tftp://1.2.3.4/c3560-ipbasek9-mz.122-40.SE.bin flash:


It successfully copies it, but if i reboot and type show version I still get the old version?


Any ideas?


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
royalblues Wed, 09/12/2007 - 04:45
User Badges:
  • Green, 3000 points or more

Chnage the boot system parameter


(config)#boot system flash:c3560-ipbasek9-mz.122-40.SE.bin


you can verify it via the sh boot command


HTH, rate if it does

Narayan

whiteford Wed, 09/12/2007 - 05:44
User Badges:

Think it worked does this look ok, the bootstrap is still old:


Backup_Network>sh version

Cisco IOS Software, C3560 Software (C3560-IPBASEK9-M), Version 12.2(40)SE, REL

SE SOFTWARE (fc3)

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Fri 24-Aug-07 01:38 by myl

Image text-base: 0x00003000, data-base: 0x01500000


ROM: Bootstrap program is C3560 boot loader

BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SE1, RELEASE SOFTW

E (fc)


Backup_Network uptime is 7 minutes

System returned to ROM by power-on

System image file is "flash:c3560-ipbasek9-mz.122-40.SE/c3560-ipbasek9-mz.122-

.SE.bin"



This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.


A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html


If you require further assistance please contact us by sending email to

[email protected].


cisco WS-C3560G-24TS (PowerPC405) processor (revision C0) with 122880K/8184K b

es of memory.

Processor board ID FOC0924U2JW

Last reset from power-on

1 Virtual Ethernet interface

28 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.


512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address : 00:14:A8:2E:70:00

Motherboard assembly number : 73-9708-04

Power supply part number : 341-0098-01

Motherboard serial number : FOC09245CSX

Power supply serial number : DCA09210H8N

Model revision number : C0

Motherboard revision number : A0

Model number : WS-C3560G-24TS-S

System serial number : FOC0924U2JW

SFP Module assembly part number : 73-7757-03

SFP Module revision Number : A0

SFP Module serial number : CAT09220RBC

Top Assembly Part Number : 800-25864-02

Top Assembly Revision Number : A0

Version ID : 02

CLEI Code Number : CNMW200ARB

Hardware Board Revision Number : 0x05



Switch Ports Model SW Version SW Image

------ ----- ----- ---------- ----------

* 1 28 WS-C3560G-24TS 12.2(40)SE C3560-IPBASEK9-M

royalblues Wed, 09/12/2007 - 05:50
User Badges:
  • Green, 3000 points or more

Yes this looks good.


Chnaging the IOS will not chnage the bootstrap though but that should not be worry


HTH, rate if it does

Narayan

lgijssel Wed, 09/12/2007 - 04:53
User Badges:
  • Red, 2250 points or more

Perform the upgrade by using a combined tar file. This file contains both the Cisco IOS image file and the files needed for CMS. You must use the combined tar file to upgrade the switch through CMS. To upgrade the switch through the command-line interface (CLI), use the tar file and the archive download-sw privileged EXEC command.


regards,

Leo


lgijssel Wed, 09/12/2007 - 04:57
User Badges:
  • Red, 2250 points or more

You may not have the required rights on CCO.

Perhaps you can ask your distributor or a collegue for the correct file?



whiteford Wed, 09/12/2007 - 04:59
User Badges:

Can you find the link if possible? I can then see if my username and password let me, I can download most things on our Smartnet contract.

whiteford Wed, 09/12/2007 - 05:10
User Badges:

Which one should I try:


IP BASE W/O CRYPTO WITH WEB BASED DEV MGR

c3560-ipbase-tar.122-40.SE.tar

Release Date: 28/Aug/2007

IP BASE W/O CRYPTO WITH WEB BASED DEV MGR

Size: 9810 KB

Minimum Memory: DRAM:128MB Flash:16MB


or


IP BASE WITH WEB BASED DEV MGR

c3560-ipbasek9-tar.122-40.SE.tar

Release Date: 28/Aug/2007

IP BASE WITH WEB BASED DEV MGR

Size: 10430 KB

Minimum Memory: DRAM:128MB Flash:16MB


there are others too.


royalblues Wed, 09/12/2007 - 05:14
User Badges:
  • Green, 3000 points or more

The second one is a crypto graphic image and would alow you to configure features like SSH etc..


You can choose anyone as long as it fulfils your requirements


Narayan

Actions

This Discussion