Cisco CCM and Tandberg VC Gatekeeper and Gateway

gerard van rij · ‎09-12-2007

Dear all,

we currently have ccm 4.2.3 running with a 2811 gateway which has 2 pri connection to our local telco.

we also have a Tandberg GK and GW. The Tandberg GW is using one pri interface connected to our local telco. Most of the time we do not use the VC system, so the pri is hardly ever used.

my question is: is there a way to integrate this with each other? e.g. connect the 3 pri from the telco to our 2811 and make a separe pri connection from our 2811 to the Tandberg GW.

regards,

Gerard

wojtek · ‎09-18-2007

Hi

Look at: http://www.cisco.com/en/US/partner/tech/tk652/tk653/technologies_tech_note09186a00804794c6.shtml

In my opinion it should work.

Regards

Wojtek

jliow · ‎10-11-2007

the URL link posted is not accessible

wojtek · ‎10-11-2007

It is accessible, but you have t log in to CCO.

Try this one, it is available without login: http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00804794c6.shtml

Regards

Wojtek