09-12-2007 04:31 AM - edited 03-17-2019 09:08 PM
Dear all,
we currently have ccm 4.2.3 running with a 2811 gateway which has 2 pri connection to our local telco.
we also have a Tandberg GK and GW. The Tandberg GW is using one pri interface connected to our local telco. Most of the time we do not use the VC system, so the pri is hardly ever used.
my question is: is there a way to integrate this with each other? e.g. connect the 3 pri from the telco to our 2811 and make a separe pri connection from our 2811 to the Tandberg GW.
regards,
Gerard
09-18-2007 11:37 PM
Hi
Look at: http://www.cisco.com/en/US/partner/tech/tk652/tk653/technologies_tech_note09186a00804794c6.shtml
In my opinion it should work.
Regards
Wojtek
10-11-2007 12:42 PM
the URL link posted is not accessible
10-11-2007 10:23 PM
It is accessible, but you have t log in to CCO.
Try this one, it is available without login: http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00804794c6.shtml
Regards
Wojtek
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide