09-12-2007 04:44 AM - edited 03-05-2019 06:26 PM
All, I am wanting to set the permissions on a 3750 so that once a user logs into the switch, all they can do is issue show commands and ping devices? I want to do this only from this switch. I do not have AAA and I do not have a radius box. Much appreciated.
09-12-2007 04:49 AM
Hi,
Please check this link,
http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml
Regards,
~JG
09-12-2007 04:50 AM
Configure the username with a privilege level of 1 and define the commands that can be used in that privilege level
username xxxx privilege 1 secre yyyyy
privilege line level 1
HTH
Narayan
09-12-2007 04:51 AM
Accessing a device via telnet brings you in this mode by default.
Simply keep the enable secret for yourself.
regards,
Leo
09-12-2007 04:58 AM
thank you. Is it possible to have read-only on the web-access portion?
09-12-2007 05:03 AM
I don't think so. To access Http users requires priv 15.
Regards,
~JG
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide