How to I set a users permission on a 3750 for READ-ONLY

rwamstutz · ‎09-12-2007

All, I am wanting to set the permissions on a 3750 so that once a user logs into the switch, all they can do is issue show commands and ping devices? I want to do this only from this switch. I do not have AAA and I do not have a radius box. Much appreciated.

Jagdeep Gambhir · ‎09-12-2007

Hi,

Please check this link,

http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml

Regards,

~JG

royalblues · ‎09-12-2007

Configure the username with a privilege level of 1 and define the commands that can be used in that privilege level

username xxxx privilege 1 secre yyyyy

privilege line level 1

HTH

Narayan

lgijssel · ‎09-12-2007

Accessing a device via telnet brings you in this mode by default.

Simply keep the enable secret for yourself.

regards,

Leo

rwamstutz · ‎09-12-2007

thank you. Is it possible to have read-only on the web-access portion?

Jagdeep Gambhir · ‎09-12-2007

I don't think so. To access Http users requires priv 15.

Regards,

~JG