Cisco Client VPN routing Issue

Unanswered Question

Hi,


I have cisco pix 515e with OS 7.2 on it

We have vpn client version 5 (the latest revision)



I have multiple subnets terminating a vpn off the pix and then on the

LAN behind the pix we have a router which is connected to another

couple of subnets via mpls



NOW when i vpn in with the client (after configuration) i can get to

the subnets with terminate a vpn off the pix but i cannot route to the

subnets via the router which connects to the mpls network!



I have tried adding in static routes and redistribute routes and a

couple of other things but any suggestions would be very helpful!



Thanks



John


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
a.alekseev Wed, 09/12/2007 - 08:37
User Badges:
  • Gold, 750 points or more

On the router you have to have a route for vpnclient's address.

On pix, please check split-tunneling.

You nerworks behind the router must be in this split-tunneling ACL.

Actions

This Discussion