cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
284
Views
0
Helpful
2
Replies

Cisco Client VPN routing Issue

johnmcc
Level 1
Level 1

Hi,

I have cisco pix 515e with OS 7.2 on it

We have vpn client version 5 (the latest revision)

I have multiple subnets terminating a vpn off the pix and then on the

LAN behind the pix we have a router which is connected to another

couple of subnets via mpls

NOW when i vpn in with the client (after configuration) i can get to

the subnets with terminate a vpn off the pix but i cannot route to the

subnets via the router which connects to the mpls network!

I have tried adding in static routes and redistribute routes and a

couple of other things but any suggestions would be very helpful!

Thanks

John

2 Replies 2

a.alekseev
Level 7
Level 7

On the router you have to have a route for vpnclient's address.

On pix, please check split-tunneling.

You nerworks behind the router must be in this split-tunneling ACL.

have you got a link where i could read a technote or could you give brief description of how to config your suggestion properly, i have tried a couple of different ways and it aint successfull

Thanks in advance

John

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: