09-12-2007 08:17 AM - edited 02-21-2020 03:16 PM
Hi,
I have cisco pix 515e with OS 7.2 on it
We have vpn client version 5 (the latest revision)
I have multiple subnets terminating a vpn off the pix and then on the
LAN behind the pix we have a router which is connected to another
couple of subnets via mpls
NOW when i vpn in with the client (after configuration) i can get to
the subnets with terminate a vpn off the pix but i cannot route to the
subnets via the router which connects to the mpls network!
I have tried adding in static routes and redistribute routes and a
couple of other things but any suggestions would be very helpful!
Thanks
John
09-12-2007 08:37 AM
On the router you have to have a route for vpnclient's address.
On pix, please check split-tunneling.
You nerworks behind the router must be in this split-tunneling ACL.
09-12-2007 09:10 AM
have you got a link where i could read a technote or could you give brief description of how to config your suggestion properly, i have tried a couple of different ways and it aint successfull
Thanks in advance
John
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: