route calls from h323 gateway

a.gooding · ‎09-12-2007

im sure its a simple question and am seeing the answers here but just parts of it.

1. PRI gateway have a called number as 86862322xx. i want that to go to a pilot number 7000 (My auto Attendant).

2. i have DID numbers 821-59xx that id like to go to extensions.

whats the config?

rob · ‎09-12-2007

Voice Translation-rule 1

rule 1 /^86862322../ /7000/

rule 2 /^82159\(.*\)/ /59\1/

Voice Translation-profile DID-Incoming

translate called 1

voice-port 0/0/0:23

translation-profile incoming DID-Incoming

-----

You will want to adjust the Voice Translation-Rule to reflect the proper digits that you are receiving from your carrier.

a.gooding · ‎09-12-2007

that did it thanks.

my main numbers are working properly however with my DID numbers im geting out of service.

Note that this PRI just came up today.

rob · ‎09-12-2007

I'm glad it worked!

debug isdn q931

term monitor

should show what you are receiving from the carrier when you receive a call

a.gooding · ‎09-12-2007

yeah i have been doing that but no luck. DID calls not coming in at all.

rob · ‎09-12-2007

Can you past the debug from an incoming DID call?

a.gooding · ‎09-12-2007

there isnt any to collect

i have q931 and ccapi inout running with term mon and there isnt any activity with i call those numbers. again, everything is fine when i call my primary set of numbers and debugs are showing up as expected.

rob · ‎09-12-2007

Sounds like a carrier problem then, maybe they didn't finish the port.

Good luck!

Zin.Karzazi · ‎09-13-2007

test voice translation-rule 1 8215988

the result should show you 5988

a.gooding · ‎09-13-2007

Results

Clf_VG#test voice translation-rule 2 8688215900

Matched with rule 2

Original number: 8688215900 Translated number: 1068

Original number type: none Translated number type: none

Original number plan: none Translated number plan: none

im translating the full number to go to extension 1068 for now.