Interfacing with I-1500DSU in Japan

Unanswered Question
Sep 13th, 2007
User Badges:
  • Silver, 250 points or more

All,


Does anyone know which WIC/VWIC card one needs to use to interface with an NTT I-1500DSU? We are going to be running a PRI-ISDN line off of it and don't know if the VWIC-1MFT-T1 card we have will work with it.


Thanks in advance for any responses!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Fri, 09/14/2007 - 03:23
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Ask NTT if the circuit is true T1 or J1. If the latter, the VWIC won't work.

Steven Griffin Fri, 09/14/2007 - 11:47
User Badges:
  • Silver, 250 points or more

According to NTT they say it is a T-1. The issue is they are delivering it on fiber using the I-1500DSU as the termination point. Will a VWIC-1MFT-T1/E1 card work with that DSU?

paolo bevilacqua Sat, 09/15/2007 - 03:28
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Yes. Note the correct P/N is either

VWIC2-1MFT-T1/E1 or VWIC-1MFT-T1


The latter is an older type with somewhat less features,, but both will work.


Hope this help, please rate post if it does!

Steven Griffin Fri, 03/28/2008 - 08:48
User Badges:
  • Silver, 250 points or more

As a follow-up to this earlier post; we finally found out, once we were on-site, that the T-1 was delivered by fiber optic cable. NTT had to bring in a special CSU to convert it to copper so we could plug into it.


So, a word of warning for anyone doing Unified Communications in Japan, never assume any PSTN connection will be a standard ITU interface.

Actions

This Discussion