WLC Diagnostic Channel: How to use it?

Unanswered Question

Does anyone know how the "Diagnostic Channel" feature in v4.1 of WLC code can be used to troubleshoot client issues? Once I check the checkbox in the WLAN Advanced properties tab, what are the next steps? Do I need to do anything on the client(s)? Where do I find the logging information the diagnostics produce?


The documentation on this feature is apparently non-existent except a small blip in the command reference guide about enabling it, but no further information on how it's used.


Many thanks,

Justin

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Anonymous (not verified) Wed, 09/19/2007 - 13:33
User Badges:

We use a WLAN with a diagnostic channel meant primarily for troubleshooting. Passing data traffic is not a concern.

I thought the diagnostic channel is used when you are having problems with that WLAN, i.e., that it creates a separate channel between the client(s) and WLAN for sending client-side diagnostic data to the WLC.


Maybe I should back up with the question and start with:


How does the diagnostic channel feature work? Can you give me an example when I would use it?


Thanks for your reply.


Justin

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode