WS-C3750-24P IOS Upgrade enable EIGRP

Answered Question
Sep 14th, 2007
User Badges:

Does any one know the correct procedures to upgrade 3750 IOS to enable EIGRP?


I have flash:c3750-ipbase-mz.122-25.SEB4/c3750-ipbase-mz.122-25.SEB4.bin


Directory of flash:/


2 -rwx 736 Mar 14 1993 10:28:06 +00:00 vlan.dat

3 -rwx 6566 Aug 2 2007 14:32:07 +00:00 config.text

4 -rwx 27 Aug 2 2007 14:32:07 +00:00 private-config.text

5 drwx 192 Mar 1 1993 00:06:34 +00:00 c3750-ipbase-mz.122-25.SEB4

363 drwx 64 Sep 14 2007 16:37:17 +00:00 update


15998976 bytes total (8882176 bytes free)


XXXXXXXX(config)#router eigrp 1

Protocol not in this image


Any help would be great



Correct Answer by Jon Marshall about 9 years 8 months ago

Hi


You will need an ipservices feature set and not an ipbase feature set to be able to run EIGRP.


Attached is a doc to upgrading 3750 in a stack. If you have a standalone 3750 much of the information is still relevant.


http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00804799d7.shtml


HTH


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jon Marshall Fri, 09/14/2007 - 08:57
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi


You will need an ipservices feature set and not an ipbase feature set to be able to run EIGRP.


Attached is a doc to upgrading 3750 in a stack. If you have a standalone 3750 much of the information is still relevant.


http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00804799d7.shtml


HTH


Jon

Actions

This Discussion