Call Manager 4.1(3) IP Phone 7906

Unanswered Question
Sep 14th, 2007

We are in the process of upgrading call manager and just upgraded to 4.1(3). I added a 7906 phone to the call manager and it regiesters. The problem is we have 2 call managers and this phone stays registered with the publisher which should be the standby call manager. When i look at the phone and check out the configuration it shows 3 call managers. My primary, secondary and then a 3rd called TFTP. The tftp server is my publisher. How do i make this phone register with my subscriber and then have the publisher as the standby?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Majdi Harb Fri, 09/14/2007 - 13:15

this is made by callmanager group, add a callmanager group with subscriber on top (first choice) and publisher under (second choice) and then assign this callmanager group to a device pool, assign this device pool to the desired phone(s)

see:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmcfg/b02cmgrp.htm

also:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmsys/a02sycfg.htm#wp1036158

hth

/majdi

Actions

This Discussion