DHCP Passthru on 340 AP

Unanswered Question
Sep 15th, 2007

I have an Aironet 340 AP that I setup at home connecting to my cable modem (through a Linksys SD216 10/100 switch). The AP gets valid DHCP IP/mask/gateway addresses from my cable modem but while my laptop sees and connects to the AP, it won't get a DHCP address. I've been able to hardwire through the switch so I can run the web interface setup (as well as by console cable and HyperTerminal), but I'm not sure if it's a configuration issue or something else.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ivillegas Thu, 09/20/2007 - 13:50

Try connecting access point to a different port of DHCP server and make sure DHCP server is configured to process the DHCp requests from the clients.

Actions

This Discussion