Cisco2811 with ADSL

Answered Question
Sep 16th, 2007
User Badges:
  • Bronze, 100 points or more

Hi,

I have Cisco 2811 router with WIC-1ADSL card, when i issue show diag, i can't see the card at the installed slot. So, i upgraded the IOS to one that supports ADSL, after that when i issue the show diag i see the following:

WIC Slot 1:

E1 Drop&Insert & G.703 (2 port) WAN daughter card

Unknown EEPROM ver 67

EEPROM format version 67

EEPROM contents (hex):

0x20: 43 30 00 00 05 C1 4F 43 33 39 53 50 81 00 00 04

0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF


Is it hardware failure at the card? or what?


Thanks in advance

Abd Alqader

Correct Answer by paolo bevilacqua about 9 years 8 months ago

Yes, it seems at minimum the eeprom got corrupted. The card should be replaced.


Hope this helps, please rate post if it does!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
paolo bevilacqua Sun, 09/16/2007 - 13:38
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Yes, it seems at minimum the eeprom got corrupted. The card should be replaced.


Hope this helps, please rate post if it does!

Actions

This Discussion