I've set up a test user context in Bridge mode on an ACE blade and now want to set up FT to a second blade. The manuals have confused me slightly and most of the examples I have seen relate to routed mode.
In my topology I have Router1 connected to Router2 which has the ACE blade. Router1 is also connected to Router3 which is in turn connected to Router4 which contains a second ACE blade.
Do I create an identical configuration for the context on the second blade and how to I define the FT vlan?
The current configuration and toplogy are attached. Any pointers would be much appreciated.
FT is configured in the Admin context.
The fact that you use bridge mode does not matter.
All you need on the standby device is the ft config. Once the FT config is ok on the standby, it will synch the full config with the active ACE.