cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
267
Views
0
Helpful
1
Replies

required number of CCM licenses

mizoran78
Level 1
Level 1

Dear all!

Is it necessary to buy a license for every node in CCM cluster?

We have two nodes in CCM5.1 cluster and we planned two licenses, so I'm just about to check out am I right about number of licenses?

Thanks

Zoran Milenkovic

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Zoran,

You are most correct :) You require a "Node License" for each Node, so in your design 2 is the proper number;

License File Contents

The license file contains the following information:

**Number of Cisco Unified CallManager nodes that are licensed: This indicates number of Cisco Unified CallManager servers in a cluster that are licensed to the customer.

Versions of the Cisco Unified CallManager that are supported.

Number of phone units licensed: Instead of creating a separate license for each phone type, a concept of unit license is used. Each phone type corresponds to a fixed number of license units.

--------------------------------------------------------------------------------

Note To determine the number of license unit that are required for each device, choose System > Licensing > License Unit Calculator. This window lists the number of license units required for each type of device. See the "Calculating License Units" section.

--------------------------------------------------------------------------------

MAC address of the server, where the license file can be installed.

From this good doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a0080633230.html#wp1049590

Hope this helps!

Rob

View solution in original post

1 Reply 1

Rob Huffman
Hall of Fame
Hall of Fame

Hi Zoran,

You are most correct :) You require a "Node License" for each Node, so in your design 2 is the proper number;

License File Contents

The license file contains the following information:

**Number of Cisco Unified CallManager nodes that are licensed: This indicates number of Cisco Unified CallManager servers in a cluster that are licensed to the customer.

Versions of the Cisco Unified CallManager that are supported.

Number of phone units licensed: Instead of creating a separate license for each phone type, a concept of unit license is used. Each phone type corresponds to a fixed number of license units.

--------------------------------------------------------------------------------

Note To determine the number of license unit that are required for each device, choose System > Licensing > License Unit Calculator. This window lists the number of license units required for each type of device. See the "Calculating License Units" section.

--------------------------------------------------------------------------------

MAC address of the server, where the license file can be installed.

From this good doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a0080633230.html#wp1049590

Hope this helps!

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: