Ordering CallManager 5.1

Answered Question
Sep 17th, 2007
User Badges:

Hi Everyone,


I believe that it is possible to order MCS servers with CCM 5.1 pre-loaded.

Apparently you can use the Top level Part Number "CALLMANAGER-5.1" to do this ?


Is this the case or does something else need to be "ordered" to have the MCS arrive with CCM pre-loaded ?


Many thanks,


Matt

Correct Answer by Rob Huffman about 9 years 8 months ago

Hi Matt,


The part # should show this (CMA2) for the MCS to come pre-loaded with CCM 5.1. Have a look;


MCS7835I2-K9-CMB1 (preloaded with Cisco Unified Communications Manager 6.0)


MCS7835I2-K9-CMA2 (preloaded with Cisco Unified Communications Manager 5.1)



From this doc;


http://www.cisco.com/en/US/products/hw/voiceapp/ps378/products_data_sheet0900aecd805718a8.html



MCS7825H3-K9-CMB1 (preloaded with Cisco Unified Communications Manager 6.0)


MCS7825H3-K9-CMA2 (preloaded with Cisco Unified Communications Manager 5.1)


From this doc;


http://www.cisco.com/en/US/products/hw/voiceapp/ps378/products_data_sheet0900aecd805efb14.html


The top level part # should probably have this as well :)


Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Mon, 09/17/2007 - 08:22
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Matt,


The part # should show this (CMA2) for the MCS to come pre-loaded with CCM 5.1. Have a look;


MCS7835I2-K9-CMB1 (preloaded with Cisco Unified Communications Manager 6.0)


MCS7835I2-K9-CMA2 (preloaded with Cisco Unified Communications Manager 5.1)



From this doc;


http://www.cisco.com/en/US/products/hw/voiceapp/ps378/products_data_sheet0900aecd805718a8.html



MCS7825H3-K9-CMB1 (preloaded with Cisco Unified Communications Manager 6.0)


MCS7825H3-K9-CMA2 (preloaded with Cisco Unified Communications Manager 5.1)


From this doc;


http://www.cisco.com/en/US/products/hw/voiceapp/ps378/products_data_sheet0900aecd805efb14.html


The top level part # should probably have this as well :)


Hope this helps!

Rob

mattepps645 Mon, 09/17/2007 - 08:34
User Badges:

Hi Rob,


it does - many thanks.


I have a Bill Of Materials given to me from my Pre-Sales Consultant and it includes:


MCS7835H2-K9-CMA2



However, another question - I presume 'pre-loaded' means simply that the software is stored on the MCS and the full Install process still has to be carried out ?


Wouldn't it be nice if all we had to do was enter usernames, passwords etc :-)


Best wishes,


Matt

Actions

This Discussion