Radio Interface Resets.

Unanswered Question
Sep 17th, 2007
User Badges:

Hi,

we have found a specular error on the radio interface of the Access Point.


Errors on the Radiso Interface area as below.


Dot11Radio0 is up, line protocol is up

47575 output errors, 0 collisions, 4 interface resets

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out



Please Help me up.


Regards

SRIHARI

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
irisrios Fri, 09/21/2007 - 10:30
User Badges:
  • Silver, 250 points or more

Reset indicate number of tims interface has been reset. This happens when th packet queued for transmission is not sent within specified seconds. This might be due to a cable problem on serial line or malfunctioning modem that is not supplying transmit clock signals.

srihari_rgda Fri, 09/21/2007 - 23:23
User Badges:

Thank you Dear,


But this problem araises on all the AP's that are in the network. so this cannot be a cable problem. What could be reason.


if the radio interfaces are reset frequently what could be the cause.


Regards

Srihari

IGBarrere Mon, 09/24/2007 - 14:17
User Badges:

Are all your access points operating on the same channel? It sounds like some sort of malformed packets that they may be receiving...

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode