09-17-2007 08:12 AM - edited 07-03-2021 02:38 PM
How to configure or import config file on more phones at the same time?
And any link for USB driver for 7921 please.
Thanks
Solved! Go to Solution.
10-03-2007 03:03 PM
Would check device manager to ensure the NIC is installed properly. If listed as unknown device or something else, then will need to reinstall the driver. The files are extracted to C:\Program Files\Cisco Systems\Cisco IP Phone CP-79xx USB Driver\7921G. Once NIC is installed and configuring an IP (i.e. 192.168.1.101), should be able to ping the phone.
09-18-2007 10:02 AM
See the 7921G Admin Guide @ http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/wip7921/admn7921/7921cfgu.htm
The USB driver is posted on the software site @ http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser-crypto.
10-01-2007 08:30 AM
Hi!
Well, I have a problem with the usb connection. I have installed the hot fix for Windows Xp Sp2, and then I have installed the driver.
The problem comes when I have to configure the USB LAN connection. There is no new Lan Connection to configure...
Some idea?
thanks!
10-03-2007 03:03 PM
Would check device manager to ensure the NIC is installed properly. If listed as unknown device or something else, then will need to reinstall the driver. The files are extracted to C:\Program Files\Cisco Systems\Cisco IP Phone CP-79xx USB Driver\7921G. Once NIC is installed and configuring an IP (i.e. 192.168.1.101), should be able to ping the phone.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide