Antenna - Connected ?

Unanswered Question
Sep 17th, 2007
User Badges:


Hi,


Is there a way to tell remotely if an antenna has been connected to a specific radio interface (just as you are able to see a serial cable connected to a serial interface) ?


Thank You,

Dragos



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
scottmac Mon, 09/17/2007 - 19:45
User Badges:
  • Green, 3000 points or more

(Assuming you mean a couple autonomous APs versus several APs connected in a LWAPP system).


Aside from looking for the RSSI (Signal Strength indicators) and making an educated guess, I'm pretty sure there's not.


Good Luck


Scott



Scott Fella Tue, 10/16/2007 - 17:07
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Well if they are 1242 ap's, the b/g side is where the console and ethernet goes, a is on the other side and is closer together. Is this what you are looking for?

zirbo Tue, 10/16/2007 - 17:15
User Badges:


Not really - I am looking for a "show *" way of telling remotely wether any antenna has been connected to the antenna port. I am not trying to locally identify the physical ports available on the access point.



Regards,

Dragos


Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode